www.prolight.co.uk
TPix Strip & Controller MKII
User Manual
9
Operating instructions
ArtNet/KlingNet mode:
Please note: For full pixel control, ArtNet/KlingNet must be used with the fixture in PIXEL-NET mode.
This will allow full control of each pixel.
To access the ArtNet/KlingNet mode, press the
“MENU”
button and use the
“UP”
and
“DOWN”
but-
tons to show
“DMX CH Mode”
on the LCD display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
“PIXEL-NET”
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Auto mode:
To access the Auto mode, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to show
“Auto Mode”
on the LCD display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons
to select either
“Speed”
or
“Program”
.
When selecting
“Speed”
press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
between
“Speed: 1”
~
“Speed: 9”
.
When selecting
“Program”
press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
between
“Program: 1”
~
“Program: 30”
.
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Master/slave mode:
To set the master unit, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to select one of
the Auto Programs.
To set the other units in slave mode, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to
show
“Slave Mode”
on the LCD display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set slave mode on/off
“Slave Mode [YES]”
or
“Slave Mode [NO]”
.
Press the
“ENTER”
button to confirm the setting.
Sound mode:
To set sound mode, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to show
“Sound
Mode”
on the LCD display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to
set slave mode on/off
“Sound Mode [YES]”
or
“Sound Mode [NO]”
.
Press the
“ENTER”
button to confirm the setting.
IP Address setting:
To access the IP address setting, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to
show
“NETWORK SETUP”
on the LCD display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
“IP Address”
. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select the part of the IP address you would like to change indicated by three downward
arrows. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to adjust the selected part of
the IP address you have chosen. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
