STAGE WASH U.V. 36
Operation Modes
Operating modes:
Brightness Mode:
To set the unit in brightness mode, press the mode button to show the last brightness setting
between
“C-00 - C-99”
on the LED display.
Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the brightness
output from 00-99. (00 = off, 99 = full on)
Strobe mode:
To set the unit in strobe mode, press the mode button to show the last strobe speed setting
between
“F-00 - F-99”
on the LED display.
Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the flash speed
from 00-99. (00 = slow, 99 = fast)
Sound Mode:
To set the unit in sound mode, press the mode button to show the last sensitivity setting between
“S-00 - S-99”
on the LED display.
Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the sound
sensitivity level from 00-99. (00 = low, 99 = high)
DMX mode:
To set the unit in DMX mode, press the mode button to show the last DMX address setting
between
“A000-A255”
on the LED display.
Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the desired DMX
address from 000-255.
Slave mode:
To set the unit(s) in slave mode, press the mode button to show
“SLAV”
on the LED display.
The unit will now run in sequence with the master unit.
Note: After setting the desired setting always press the “ENTER” button a second time to
confirm your choice.
DMX function chart: