Ledj SPECTRA PAR 7T3, Руководство пользователя

Страница: 10 / 16

DMX-512:
• DMX (Digital Multiplex) is a universal protocol used as a form of communication between
intelligent fixtures and controllers. A DMX controller sends DMX data instructions form the
controller to the fixture. DMX data is sent as serial data that travels from fixture to fixture via the
DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only have
a data “out” terminal).
DMX Linking:
• DMX is a language allowing all makes and models of different manufactures to be linked together
and operate from a single controller, as long as all fixtures and the controller are DMX compliant.
To ensure proper DMX data transmission, when using several DMX fixtures try to use the
shortest cable path possible. The order in which fixtures are connected in a DMX line does not
influence the DMX addressing. For example; a fixture assigned to a DMX address of 1 may be
placed anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle. When a
fixture is assigned a DMX address of 1, the DMX controller knows to send DATA assigned to
address 1 to that unit, no matter where it is located in the DMX chain.
DATA Cable (DMX cable) requirements (for DMX operation):
• The Spectra Par 7T3 can be controlled via DMX-512 protocol. The DMX address is set on the
back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for
data input/output.
Also remember that DMX cable must be daisy chained and cannot be split.
9.
Further exterior DMX and power cables
can be purchased from all good sound and
lighting suppliers or Prolight dealers.
Please quote:
DMX: Power:
LEDJ141 - 1m LEDJ146 - 1m
LEDJ142 - 2m LEDJ147 - 2m
LEDJ143 - 5m LEDJ148 - 5m
LEDJ144 - 10m LEDJ149 - 10m
Interior to exterior DMX:
LEDJ91 - 1m
Spectra Par 7T3 DMX Set up
IP Rated Exterior Power Cable
IP Rated Exterior DMX Cable
Interior to IP Rated Exterior DMX Cable