www.prolight.co.uk
Pixel Storm 6 Tri Batten
User Manual
6
Built-in program mode:
To access the built-in program mode press
“MODE”
until the display shows
Pr.01
on the LED display.
Press
“ENTER”
to confirm the setting. Use the
“UP”
and
“DOWN”
buttons to select a program from
Pr.01
~
Pr.12
. Press the
“ENTER”
button to confirm the setting.
To change the speed of the selected program press the
“ENTER”
button and then
use the
“UP”
and
“DOWN”
buttons to select any value from
SP00
~
SP99
.
Press the
“ENTER”
button to confirm the setting, then use the
“UP”
and
“DOWN”
buttons to select and value from
F500
~
F599
for the strobe feature.
Press the
“ENTER”
button to confirm the setting.
In
Pr.01
you are able to set a specific static colour. When in
Pr.01
press the
“ENTER”
button and then use the
“UP”
and
“DOWN”
buttons to go through the
static colours. Press the
“ENTER”
button to confirm the setting, then use the
“UP”
and
“DOWN”
buttons to select and value from
F500
~
F599
for the strobe
feature. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MODE”
button.
Static colour mode:
To access the static colour mode press
“ENTER”
until
Colr
shows on the LED display.
Press the
“ENTER”
button and the LED display will show
r.225
. Now use the
“UP”
and
“DOWN”
buttons to select the brightness between
r.000
~
r.255
. Press the
“ENTER”
button and repeat for
green and blue.
Value: 000 - 255 (000 = low, 255 = high)
To exit out of any of the above options, press the
“MODE”
button.
Master/slave mode:
To set the master unit, press the
“MODE”
button on the rear of the master unit then select your
desired program (sound active, auto, static colour or one of the built-in programs).
To set the other units in slave mode, press the
“MODE”
button on the rear of the unit to show
SLAU
on the LED display and press the
“ENTER”
button to confirm the setting. The units will now run in
sequence with the master unit.
To exit out of any of the above options, press the
“MODE”
button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Operating instructions
Static colours:
1.--r
- Red
2.-rg
- Yellow
3.--g
- Green
4.-gb
- Cyan
5.--b
- Blue
6.-rb
- Pink
7.rgb
- White
8.off
- Blackout
18 channel mode:
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
R1
(0-255)
G1
(0-255)
B1
(0-255)
R2
(0-255)
G2
(0-255)
B2
(0-255)
R3
(0-255)
G3
(0-255)
B3
(0-255)
CH10
CH11
CH12
CH13
CH14
CH15
CH16
CH17
CH18
R4
(0-255)
G4
(0-255)
B4
(0-255)
R5
(0-255)
G5
(0-255)
B5
(0-255)
R6
(0-255)
G6
(0-255)
B6
(0-255)