Ledj PERFORMER 36 RGB, Руководство пользователя

Страница: 5 / 8

Performer 36 RGB Operations
DMX mode:
To select DMX mode, press the “MENU” button to show “D001” on the display. Now press the
“ENTER” button and use the “UP” and “DOWN” buttons to set the DMX address from 001-512.
When you have finished setting the desired DMX address press the “ENTER” button.
Colour change mode
To select the colour change mode, press the “MENU” button to show “CC00” on the display. Now
press the “ENTER” button and use the “UP” and “DOWN” buttons to adjust the speed of the
colour change. To confirm your choice, press the “ENTER” button.
Colour fade mode
To select the colour fade mode, press the “MENU” button to show “CP00” on the display. Now
press the “ENTER” button and use the “UP” and “DOWN” buttons to adjust the speed of the
colour fade. To confirm your choice, press the “ENTER” button.
Please note that in this mode the unit will run through both static colour fade and colour
fade in/out modes. To access the modes individually, please set the unit into DMX mode
and see the DMX chart overleaf.
Auto built-in programmes mode
To select the Auto Built-in programme mode, press the “MENU” button to show “dE00” on the
display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to adjust the
speed. To confirm your choice, press the “ENTER” button.
Please note that in this mode the unit will run through all of the colour change and colour
fade modes. To access the modes individually, please set the unit into DMX mode and see
the DMX chart overleaf.
Sound active mode
To select the Sound active mode, press the “MENU” button to show “bEbE” on the display. Now
press the “ENTER” and the unit will respond to the beat of the music.
Static colour mode
Red
To adjust the brightness of the red LEDs, press the “MENU” button to show “R255” on the
display. Now press use the “UP” and “DOWN” buttons to adjust the brightness from 000-255.
To confirm your choice, press the “ENTER” button. Note: 000 = off, 255 = full on.
Green
To adjust the brightness of the green LEDs, press the “MENU” button to show “G255” on the
display. Now press use the “UP” and “DOWN” buttons to adjust the brightness from 000-255.
To confirm your choice, press the “ENTER” button. Note: 000 = off, 255 = full on.
Blue
To adjust the brightness of the blue LEDs, press the “MENU” button to show “B255” on the
display. Now press use the “UP” and “DOWN” buttons to adjust the brightness from 000-255.
To confirm your choice, press the “ENTER” button. Note: 000 = off, 255 = full on.
Master/slave mode
To set the unit as a master, simply select any of the above modes and set the slave units into DMX
mode, address 001. The slave units will now follow in sequence with the master unit.