www.prolight.co.uk
UV Spectra Batten
User Manual
4
Operating instructions
DMX channel mode:
To access the DMX channel mode, press the
“MODE”
button on the rear of the unit to show
A001
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the
desired DMX address. Now press the
“ENTER”
button to choose one of the 1 or 2 DMX channel modes
using the
“UP”
and
“DOWN”
buttons, and press the
“ENTER”
use the
“UP”
and
“DOWN”
buttons to set
what the unit should do if it loses DMX signal.
bLC
- The unit will blackout if DMX signal is lost.
Soun
- The unit will go into sound active mode if DMX signal is lost.
HoLd
- The unit will hold the last DMX command if DMX signal is lost.
To exit out of any of the above options, press the
“MODE”
button.
Static mode:
To access static mode press
“ENTER”
until the display shows
C-00
on the LED display.
To adjust the brightness use the
“UP”
and
“DOWN”
buttons to select between
C-00
~
C-99
.
Press the
“ENTER”
button to confirm the setting. Now use the
“UP”
and
“DOWN”
buttons to adjust the
flash speed by selecting between
F-00
~
F-99
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MODE”
button.
Slave mode:
Press the
“MODE”
button on the rear of the unit to show
SLAU
on the LED display and press the
“ENTER”
button to confirm the setting. The unit will now run in sequence with the master unit.
To exit out of any of the above options, press the
“MODE”
button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Sound active mode:
To access the sound active mode, press the
“MODE”
button on the rear of the unit to show
SU00
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the
sound sensitivity level from
SU.00
~
SU.99
and press the
“ENTER”
button to confirm the setting.
Value: 00 - 99 (00 = low, 99 = high)
To exit out of any of the above options, press the
“MODE”
button.
Channel
Value
Function
1
000-255 Master dimmer (0-100%)
Channel
Value
Function
1
000-255 Master dimmer (0-100%)
2
000-255 Flash speed (slow to fast)
2 channel mode:
Static mode
C-00
~
C-99
Brightness (0-100%)
F-00
~
F-99
Flash speed (slow-fast)
Slave mode
SLAV
Sound active mode
SU00
~
SU99
Menu system
DMX mode
1CH, 2CH
Address setting
A001
~
A512
IR function
Iron
- IR On
IroF
- IR Off
1 channel mode: