Ledj LEDJ456, Руководство пользователя

Страница: 5 / 8

www.prolight.co.uk Display Qube User Manual
5
Installation:
The Display Qube is designed to be hung from the power supply using the included safety wire via the
rigging point. Once the Qube is correctly installed, connect the Qube to the power supply via the captive
connection. The quick release omega clamp gives you multiple options for truss or ceiling mounting.
The Qubes SD controller (Order code: LEDJ462) has 8 RJ45 zone connections. Each one of these
connections can control a maximum of 2 qubes per zone with a maximum cable length of 18m (in total).
Please note: the Qube requires the SD controller (Order code: LEDJ462) to operate. The Qube will not
operate stand alone.
Installation example 1 - For instance if using 2 qubes on one zone the maximum cable length between
qube power supplies/controller must not exceed 9m.
Installation example 2 - For instance if using 1 qube on one zone the maximum cable length between
qube power supply and controller must not exceed 18m.
Installation
Omega clamp Omega clamp
Safety wire Safety wire
Power input
to Qube
Power input
to Qube
PowerCON
output
PowerCON
input
PowerCON
input
Controller
RJ45 signal
output
RJ45 signal
input
RJ45 signal
input
Power supply Power supply
9m 9m
Omega clamp
PowerCON input
Controller
RJ45 signal input
18m
Power supply
Safety wire
Power input
to Qube
Controller
Power supply
RJ45 cables sold separately and can be purchased from most Prolight Concepts dealers.
Please quote:
CABL260 – 0.5m CABL261 – 1m CABL262 – 2m CABL263 – 5m CABL264 – 10m