www.prolight.co.uk
Rapid QB1 RGBW
User Manual
8
Operating instructions
Wireless DMX operation:
To operate the fixture in wireless DMX you will need to connect the fixture to a W-DMX compatible
wireless DMX Transmitter. Firstly clear the fixtures wireless DMX memory by following the instructions
below. To pair the fixture and transmitter make sure the wireless DMX indicator is off.
To turn wireless DMX on, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to show
UiFi
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to
select
SEtt
. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
on
.
Press the
“ENTER”
button to confirm the setting.
To put the unit into Wireless DMX receive mode, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to show
UiFi
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
t-r
. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
rECE
. Press the
“ENTER”
button to confirm the setting. Press the pair button on
the transmitter. The wireless DMX indicator will start flashing fast. Once the pair is successful the
indicator will turn solid yellow.
To turn wireless DMX off, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to show
UiFi
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to
select
SEtt
. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
off
.
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
To link multiple Rapid QB1 via wireless master/slave see
Wireless master/slave operation
.
Clear wireless DMX memory:
To clear the wireless DMX memory, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to
show
UiFi
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons
to select
SEtt
. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
CLEA
.
Press and hold the
“ENTER”
button for 5 seconds to erase the wireless DMX memory.
The Wireless DMX indicator will go off. To exit out of any of the above options, press the
“MENU”
button.
Please note: When the fixture is in Wireless DMX transmit mode the wireless DMX memory of the
Transmitter unit and all receiving units will be cleared. When in Wireless DMX receive mode the wireless
DMX memory of that one receiving unit will be cleared.
Wireless DMX indicator information:
When the Wireless DMX indicator LED is illuminated, the fixture is paired.
When the Wireless DMX indicator LED is flashing fast, the fixtures settings from the last pair are saved
but the fixture isn’t paired with the transmitter.
When the Wireless DMX indicator LED is flashing slow, the fixtures is paired with the transmitter but isn’t
receiving signal.
When the Wireless DMX indicator LED is off, the fixtures doesn’t have any remembered wireless DMX
settings and isn’t paired with a transmitter.
