www.prolight.co.uk
Rapid QB1
User Manual
8
Operating instructions
Wireless DMX operation:
To operate the fixture in wireless DMX you will have to connect the fixture to a W-DMX compatible
wireless DMX Transmitter. Firstly clear the fixtures wireless DMX memory by following the instructions
below. To pair the fixture and transmitter make sure the wireless DMX indicator is off. Press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons on the front of the unit to show
Uifi
on the LED dis-
play. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
on
. Press the
“ENTER”
button to confirm the setting. Press the pair button on the transmitter. The wireless DMX indicator will
start flashing fast. Once the pair is successful the indicator will turn solid yellow.
To turn wireless DMX off press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons on the front of
the unit to show
Uifi
on the LED display. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
oFF
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Clear wireless DMX memory:
To clear the wireless DMX memory, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons
on the front of the unit to show
UiFi
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose
CLEA
. Press and hold the
“ENTER”
button for 5 seconds
to erase the wireless DMX memory. The Wireless DMX indicator will go off.
To exit out of any of the above options, press the
“MENU”
button.
Wireless DMX indicator information:
When the Wireless DMX indicator LED is illuminated yellow, the fixture is paired.
When the Wireless DMX indicator LED is flashing fast yellow, the fixtures settings from the last pair are
saved but the fixture isn’t paired with the transmitter.
When the Wireless DMX indicator LED is flashing slow yellow, the fixtures is paired with the transmitter
but isn’t receiving signal.
When the Wireless DMX indicator LED is off, the fixtures doesn’t have any remembered wireless DMX
settings and isn’t paired with a transmitter.
DMX Signal Fail:
To access the DMX signal fail setting, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons
on the front of the unit to show
FAiL
on the LED display. Now press the
“ENTER”
button and use
the
“UP”
and
“DOWN”
buttons to choose between
HoLd
(Hold),
bLaC
(Blackout) or
AUto
(Auto mode). Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
