www.prolight.co.uk
Spectra Par 12HEX10 PRO
User Manual
6
Operating instructions
Auto mode:
To access the auto mode press
“MODE”
until the display shows
Auto
on the LED display. The fixture
will now run through its built in programs
Pr.02
~
Pr.12
. To exit out of any of the above options,
press the
“MODE”
button. NOTE: The user can set up the speed and flash speed for
Pr.02
~
Pr.12
under the built in programs mode. Changing this here will then take effect when running auto mode.
RGBWAUV colour mix mode:
To access the static colour mode press
“MODE”
until
CoLr
shows on the LED display.
Now press the
“SETUP”
button and use the
“UP”
and
“DOWN”
buttons to select the brightness
between
r.000
~
r.255
. Press the
“SETUP”
button and repeat for green (
G
), blue (
b
), white (
u
) ,
amber (
A
) and UV (
I
).
Value: 000 - 255 (000 = low brightness, 255 = high brightness)
To exit out of any of the above options, press the
“MODE”
button.
Factory reset:
To reset the fixture to factory settings, power the fixture off. Press and hold the
“MODE”
and
“SETUP”
buttons whilst powering the unit up. Keep hold of the
“MODE”
and
“SETUP”
buttons for 3 seconds after
power up. The unit will now have reset to factory settings.
Built-in program
Pr.01
Static colour
Pr.02
6 colour fade in/out
Pr.03
Colour fade in/out
Pr.04
Colour fade
Pr.05
6 colour change
Pr.06
Colour change
Pr.07
Red continuous fade
Pr.08
Green continuous fade
Pr.09
Blue continuous fade
Pr.10
White continuous fade
Pr.11
Amber continuous fade
Pr.12
UV continuous fade
SP00
~
SP99
(speed)
F500
~
F599
(flash)
RGBWAUV colour mix
mode
r.000
~
r.255
Red
g.000
~
g.255
Green
b.000
~
b.255
Blue
u.000
~
u.255
White
A.000
~
A.255
Amber
I.000
~
I.255
UV
Auto mode
AUTO
Slave mode
SLAu
DMX mode
6CH, 8CH, 10CH
Address setting
d.001
~
d.512
Menu system
