www.prolight.co.uk
Spectra Par 15Q8
User Manual
6
Operating instructions
Auto mode:
To access the auto mode press
“ENTER”
until the display shows
Auto
on the LED display. The fixture
will now run through its built in programs
Pr.02
~
Pr.10
. To exit out of any of the above options,
press the
“MODE”
button. NOTE: The user can set up the speed and flash speed for
Pr.02
~
Pr.10
under the built in programs mode. Changing this here will then take effect when running auto mode.
RGBW colour mix mode:
To access the static colour mode press
“MENU”
until
CoLr
shows on the LED display.
Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select the brightness
between
r.000
~
r.255
. Press the
“ENTER”
button and repeat for green (
G
), blue (
b
) and white (
u
).
Value: 000 - 255 (000 = low brightness, 255 = high brightness)
To exit out of any of the above options, press the
“MENU”
button.
Fixture hours:
To access the fixture hours press
“MENU”
until
LiFE
shows on the LED display.
Now press the
“ENTER”
button and the fixture hours will be displayed.
To exit out of any of the above options, press the
“MENU”
button.
Built-in program
Pr.01
Static colour
Pr.02
4 colour fade in/out
Pr.03
10 colour fade in/out
Pr.04
Colour fade
Pr.05
4 colour change
Pr.06
10 colour change
Pr.07
Red continous fade
Pr.08
Green continous fade
Pr.09
Blue continous fade
Pr.10
White continous fade
SP00
~
SP99
(speed)
F500
~
F599
(flash)
RGBW colour mix mode
r.000
~
r.255
Red
g.000
~
g.255
Green
b.000
~
b.255
Blue
u.000
~
u.255
White
Auto mode
AUTO
Slave mode
SLAV
DMX mode
4CH, 6CH, 8CH
Address setting
d.001
~
d.512
Fixture hours
LifE
Menu system
