www.prolight.co.uk
150W UV COB Flood
User Manual
6
DMX mode:
Operating in a DMX control mode environment gives the user the greatest flexibility when it comes
to customising or creating a show. In this mode you will be able to control each individual trait of
the fixture and each fixture independently.
To access the DMX address mode, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to
show
A001
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons
to set the required DMX address. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
DMX channel mode:
To access the DMX channel mode, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to
show
Chnd
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons
to choose one of the 1 or 2 DMX channel modes. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Operating instructions
1 channel mode:
Channel Value
Function
CH1
000-255 Master dimmer (0-100%)
2 channel mode:
Channel Value
Function
CH1
000-255 Master dimmer (0-100%)
CH2
000-255 Strobe (slow-fast)
Manual mode:
To access manual mode, press the
“MENU”
button to show
C-00
on the LED display. Now press
the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the dimmer brightness between
00
~
99
. Press the
“ENTER”
button to confirm the setting. Press the
“MENU”
button once more to
show
F-00
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the strobe speed between
00
~
99
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Master/slave mode:
To set the master unit, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to select one of
the manual or sound active modes.
To set the other units in slave mode, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to
show
SLAV
on the LED display. Press the
“ENTER”
button to confirm the setting.
The unit will now run in sequence with the master unit.
To exit out of any of the above options, press the
“MENU”
button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
