Ledj LEDJ107, Руководство пользователя

Страница: 5 / 12

1, DMX Mode
To enter the DMX mode, press the “MODE” button to show “A001” on the LED display. Now press
the “ENTER” button and use the “UP” and “DOWN” buttons to set the DMX address from 001-512.
Now press the “ENTER” button again to choose a DMX channel mode using the “UP” and “DOWN” buttons.
You can select one of the four channel modes for operation 04.CH, 06.CH, 12.CH or 15.CH.
When you are happy with your choice, press the “ENTER” button to confirm it.
2, Static colour mode
To enter the Static colour mode, press the “MODE” button to show “PR.00” on the LED display. Now press
the “ENTER” button and use the “UP” and “DOWN” buttons to select one of the static colours from
CL.01 - CL.15.
Now press the “ENTER” button again and you can then select the strobe speed using the “UP” and “DOWN”
buttons from FS.00 - FS.99 (00 = off, 99 = fast)
When you are happy with your settings, press the “ENTER” button to confirm them.
3, Manual RGBW Colour Mix Mode
To enter the Manual RGBW Colour Mix Mode, press the “MODE” button to show “PR.01” on the LED display.
Now press the “ENTER” button and use the “UP” and “DOWN” buttons to select Red, Green, Blue or White.
To make the colour selection, press the “ENTER” button again and use the “UP” and “DOWN” buttons to
change the colour value from 001-255.
1) R001 = Red, 2) G001 = Green, 3) B001 = Blue, 3) o001 = White
NOTE: Each colour has a brightness value from 001-255 (001 = off, 255 = full on)
Now press the “ENTER” button again and you can then select the strobe speed using the “UP” and “DOWN”
buttons from FS.00 - FS.99 (00 = off, 99 = fast)
When you are happy with your settings, press the “ENTER” button to confirm them.
4, 4 Colour Change Mode
To enter the 4 Colour Change Mode, press the “MODE” button to show “PR.02” on the LED display.
Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the speed from 00 - 99.
Press the “ENTER” button again and you can then select the strobe speed using the “UP” and “DOWN”
buttons from FS.00 - FS.99 (00 = off, 99 = fast)
When you are happy with your settings, press the “ENTER” button to confirm them.
5, 15 Colour Change Mode
To enter the 15 Colour Change Mode, press the “MODE” button to show “PR.03” on the LED display.
Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the speed from 00 - 99.
Press the “ENTER” button again and you can then select the strobe speed using the “UP” and “DOWN”
buttons from FS.00 - FS.99 (00 = off, 99 = fast)
When you are happy with your settings, press the “ENTER” button to confirm them.
6, Fade Mode
To enter the Fade Mode, press the “MODE” button to show “PR.04” on the LED display.
Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the speed from 00 - 99.
Press the “ENTER” button again and you can then select the strobe speed using the “UP” and “DOWN”
buttons from FS.00 - FS.99 (00 = off, 99 = fast)
When you are happy with your settings, press the “ENTER” button to confirm them.
LEDJ Stage Colour Quad Operation