www.prolight.co.uk
HEX Par 9
User Manual
8
Setting the DMX address:
The DMX mode enables the use of a universal DMX controller. Each fixture requires a “start address”
from 1- 512. A fixture requiring one or more channels for control begins to read the data on the channel
indicated by the start address. For example, a fixture that occupies or uses 7 channels of DMX and was
addressed to start on DMX channel 100, would read data from channels: 100,101,102,103,104,105
and 106. Choose a start address so that the channels used do not overlap. E.g. the next unit in the
chain starts at 107.
DMX 512:
DMX (Digital Multiplex) is a universal protocol used as a form of communication between intelligent
fixtures and controllers. A DMX controller sends DMX data instructions form the controller to the fixture.
DMX data is sent as serial data that travels from fixture to fixture via the DATA “IN” and DATA “OUT”
XLR terminals located on all DMX fixtures (most controllers only have a data “out” terminal).
DMX linking:
DMX is a language allowing all makes and models of different manufactures to be linked together
and operate from a single controller, as long as all fixtures and the controller are DMX compliant.
To ensure proper DMX data transmission, when using several DMX fixtures try to use the shortest
cable path possible. The order in which fixtures are connected in a DMX line does not influence the
DMX addressing. For example; a fixture assigned to a DMX address of 1 may be placed anywhere in
a DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture is assigned a
DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit,
no matter where it is located in the DMX chain.
DATA cable (DMX cable) requirements (for DMX operation):
This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit.
DMX setup
Further DMX cables can be purchased from all good sound and lighting suppliers or Prolight Concepts dealers.
Please quote:
LEDJ 1m Interior -
Exterior DMX cable
LEDJ 1m Exterior
DMX cable
LEDJ 2m Exterior
DMX cable
LEDJ 5m Exterior
DMX cable
LEDJ 10m Exterior
DMX cable
Order code: LEDJ91
Order code: LEDJ141 Order code: LEDJ142 Order code: LEDJ143 Order code: LEDJ144
LEDJ 1m Exterior
Power cable
LEDJ 2m Exterior
Power cable
LEDJ 5m Exterior
Power cable
LEDJ 10m Exterior
Power cable
Order code: LEDJ146 Order code: LEDJ147 Order code: LEDJ148 Order code: LEDJ149
Also remember
that DMX cable
must be daisy
chained and
cannot be split.
