Ledj HBR 1D, Руководство пользователя

Страница: 5 / 8

Features:
7 Preset colour buttons for instant colour selection.
6 Buttons for dimmer, sound, mood, meteor, fade and change.
9 Flow buttons for instant light shows.
Sound active function with adjustable sensitivity.
Blackout, flood & strobe functions.
1, Blackout mode:
When you power up your HBR-1D controller, the LED above the “BLACKOUT” button will
illuminate, indicating that the unit is set to blackout mode. To exit the blackout mode simply press
any one of the function buttons.
2, Preset colour mode
In this mode you can select one of the seven preset colours by pressing one of the designated
colour buttons. Once you have selected your colour you can now set the desired flash speed from
slow - fast by using the “FLASH SPEED” slider. (0 = slow, 255 = fast)
3, Dimmer mode
To activate this mode first press the ‘DIMMER” button and make sure that the “SPEED/DIMMER”
slider is set to 255. Now you can use any of the “RED, GREEN and BLUE” colour sliders to set
the desired output brightness and colour. To set the flash speed use th e “FLASH SPEED” slider
to set the desired speed (0 = slow, 255 = fast).
4, Sound Active mode
To activate this mode, press the “SOUND” button. You will need to adjust the “SPEED/DIMMER”
slider to set the music input sensitivity level. (0 = low, 255 = high) You can then use the “FLASH
SPEED” slider to set the desired strobe speed. (0 = slow, 255 = fast)
5, Colour Mood mode
To activate this mode, press the “MOOD” button, then adjust the speed to the desired level using
the “SPEED/DIMMER” slider (0 = slow, 255 = fast). You can now use the “FLASH SPEED” slider
to set the desired strobe speed (0 = slow, 255 = fast). This mode is ideal for wall and up/down
lighting to create different mood effects in bars, restaurants and shops etc.
6, Meteor mode
To activate this mode press the “METEOR” button, then adjust the speed to the desired level by
using the “SPEED/DIMMER” slider (0 = slow, 255 = fast). The unit will now run from right to left
through its built-in preset colours. You can now use the “FLASH SPEED” slider to set the desired
strobe speed (0 = slow, 255 = fast).
7, Colour Fade mode
To activate this mode press the “FADE” button, then adjust the speed to the desired level by us-
ing the “SPEED/DIMMER” slider (0 = slow, 255 = fast). The unit will now fade through its built-in
preset colours. You can now use the “FLASH SPEED” slider to set the desired strobe speed
(0 = slow, 255 = fast).
8, Colour change mode
To activate this mode press the “CHANGE” button and adjust the speed to the desired level by
using the “SPEED/DIMMER” slider (0 = slow, 255 = fast). The unit will now change through its
built-in preset colours. You can now use the “FLASH SPEED” slider to set the desired strobe
speed (0 = slow, 255 = fast).