www.prolight.co.uk
Event Spot DTW
User Manual
7
DMX fail setting:
To set the DMX fail setting, press the
“MENU”
button on the rear of the unit to show
“DMX FAIL”
on the
LCD display. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select
“BLACKOUT”
,
“HOLD”
or
“STATIC”
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Manual dimming mode:
To access the manual dimming mode, press the
“MENU”
button on the rear of the unit to show
“Manual”
on the LCD display. The unit is now in manual dimming mode. Press the
“ENTER”
button
and use the
“UP”
and
“DOWN”
buttons to set the brightness from
“00” - “99”
. Press the
“ENTER”
button
again and use the
“UP”
and
“DOWN”
buttons to set the strobe speed from
“00” - “99”
.
Press the
“ENTER”
button to confirm the setting.
(00 = LED off/strobe off, 99 = LED at full brightness/strobe fast)
To exit out of any of the above options, press the
“MENU”
button.
Fixture temperature:
To check the fixtures temperature, press the
“MENU”
button on the rear of the unit to show
“Temperature”
on the LCD display. The fixture will now display the temperature.
To exit out of any of the above options, press the
“MENU”
button.
Operating instructions