www.prolight.co.uk
Event Spot DL/WW
User Manual
8
Optional IR remote functions:
Button functions:
DMX address examples:
To set the DMX address;
•
Press the “S” button, the LED illuminates in full, you can now start to set the DMX address
•
Select the required 3 digit DMX address (eg 001 or 136 or 275) the unit will then flash
to confirm the address has been set
•
Now press the “DMX MODE” button to save the new address into the memory
Important notes:
•
Set the DMX address on each fixture before plugging into the DMX controller
•
The IR remote is cannot be used when the fixture(s) are being controlled by a DMX controller
•
The maximum transmitter distance is 10m - Please make sure that you have the IR remote aimed
directly at the front panel of each fixture to be programmed
•
If you do not press the “DMX MODE” button after you have changed the DMX address,
when you power down the fixture it will lose the address you have set
01 - Blackout
02 - To set the brightness of the LED either
select 20%, 50% or 100% or alternatively
you can use the ‘+’ and ‘-’ buttons
03 - Flash off
04 - To set the flash speed of the LED either
select 20%, 50% or 100% or alternatively
you can use the ‘+’ and ‘-’ buttons
05 - Set the LED into DMX mode
06 - Set the LED into sound active mode
07 - Set the LED into slave mode
08 - Set the DMX address for the LED
1 2 3
4 5 6 0
+
_
7 8 9
D
SL S
OFF
20%
50%
100%
SA
STROBE
OFF
20%
50%
100%
DIMMING
SLAVE
SET ADDR
SOUND ACTIVE
DMX MODE
01
04
02
07
06
05
08
Optional
IR remote
Order code:
LEDJ90E
03
Operating instructions
