Ledj Event Panel, Руководство пользователя

Страница: 5 / 12

LEDJ Event Panel Over view
Auto Run mode:
To access the Auto run mode, Press the “MODE” button until the LED display shows
AU70.
,
then press the “SETUP” button and it will show
N.OO1
, you can now select the programme
running times by using the “UP” and “DOWN” buttons. Programme Running times N.001 - N.100
Note: The Programme running time indicates how many times the running programme is repeated
before moving on to the next one.
DMX Mode
To control the Event Panel individually via your DMX controller, press the “MODE” button untill
is shown on the LED display, it is now in DMX mode. Now press the “SETUP” button so
the LED display shows
.001
, this now means that the DMX address is set at 001. You can
select your DMX address by using the “UP” and “DOWN” buttons. If you press the “SETUP”
button the LED display will show:
03.Ch.
,
06C.h.
,
12.ch.
,
24.ch.
, or
p4.ch.
this selects which DMX mode the Event Panel is being run in. You can select any of these 5 DMX
modes by using the “UP” and “DOWN” buttons.
DMX Values
03CH
06CH
12CH
4