LEDJ Eco LED 64
MASTER/SLAVE
Operation modes
Strobe Mode
To set the unit in strobe mode, set dip switch
1
to
ON
and all others to the
OFF
position. Now use
the sensitivity control to adjust the speed.
Fade mode
To set the unit in fade mode, set dip switch
2
to
ON
and all others to the
OFF
position. Now use
the sensitivity control to adjust the speed.
7 Colour Chase mode
To set the unit in 7 colour chase mode, set dip switch
3
to
ON
and all others to the
OFF
position. Now use the sensitivity control to adjust the speed.
5 Colour Chase mode
To set the unit in 5 colour chase mode, set dip switch
4
to
ON
and all others to the
OFF
position. Now use the sensitivity control to adjust the speed.
Red and Green Colour Chase Mode
To set the unit in red and green colour chase mode, set dip switch
5
to
ON
and all others to the
OFF
position. Now use the sensitivity control to adjust the speed.
Static Colour Selection
To select a static colour, use any of the dip switches listed below;
Dip switch
6
set to
ON
, obtains static Red
Dip switch
7
set to
ON
, obtains static Green
Dip switch
8
set to
ON
, obtains static Blue
Now use the sensitivity control to adjust the brightness.
Note: You can have any combination of switches 6, 7 and 8 to obtain any static colour mix.
Sound Activation
The Eco LED 64 Can has a built-in microphone which enables it to operate in Sound to Light
mode. Set the sensitivity control to the desired level, and the Eco LED 64 Can will change colour
to the beat of the music. Set
dip switch 9
to
ON
and all others to the
OFF
position to activate
Sound Mode.
Master/Slave mode
Use any of the above modes to set the master unit. To set the unit(s) in slave mode set dip switch
10
to the
ON
position and all others to
OFF.
Note: When all of the dip switches are set to OFF, the unit will automatically run in a RGB
colour chase. Use the sensitivity control to adjust the speed.
on
