www.prolight.co.uk
EasiLED 4 DMX Controller
User Manual
6
Operating instructions
01) Rotary colour selectors:
Twelve, preset colours selectable using simple rotary controls when the controller is used in Manual
Mode.
02) Fixture dimmer controls:
Four dimmer faders, each for controlling the intensity for a fixture/group.
03) Chase selector (12 settings):
The controller can store up to 12 chases, each chase may be built using up to 12 scenes per chase.
Use the rotary selector to choose the required chase.
04) Preset/User bank selector:
Use this button to switch between Manual/Fader mode and User/Bank modes.
05) Scene selector (12 settings):
The controller can store up to 12 chases, each chase may be built using up to 12 scenes per chase.
Use the rotary selector to choose the required scene after selecting the chase.
06) Save/Delete button:
When the controller is in Manual mode, a quick press will save a selected scene, confirmed by three
green flashes of the LED. Press and hold to delete a selected scene, all LEDs on the controller will flash
to confirm scene deletion.
07) Master dimmer:
Active in all modes, the master dimmer control can be used to adjust the intensity of all fixtures
connected to the controller.
08) Speed control:
The speed control can be used to adjust the chase speed when the controller is in Auto mode.
Turn clockwise to increase the chase speed.
09) Fade time control:
Active in all modes, the Fade Time control can be used to adjust fade time between all functions on the
controller including manual colour selections. For instant changes the fade time must be turned fully to
the left (anti-clockwise).
10) Strobe speed control:
The Strobe Speed Control can be preselected ahead of Strobe Mode activation. Turn clockwise to
increase the strobe frequency.
11) Blackout button:
Press the Blackout button to activate blackout for all fixtures controlled by the EasiLED 4 controller.
While activated, Blackout mode will be confirmed by a red LED flashing next to the button.
12) TAP/Tempo button:
The TAP/Tempo control allows the user to select the playback speed for chases in time. While in Auto
mode, press the TAP/Tempo button a minimum of three times to set the desired playback speed.
