www.prolight.co.uk
Artisan 2000 Dual White Fresnel
User Manual
10
Operating instructions
DMX fail setting:
To access the fixtures DMX fail setting, press the
“MENU”
button to show
“DMX FAIL”
on the LCD
display. Now use the
“UP”
and
“DOWN”
buttons on the rear of the unit to select between
“BLACKOUT”
,
(blacks out the fixture when signal is lost)
“HOLD”
(holds last DMX command) and
“STATIC”
(manual mode). Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
IR setting:
To access the units IR setting, press
“MENU”
to show
“OTHER BLGT”
on the LCD display. Press the
“EN-
TER”
button to show
“OTHER IR”
on the LCD display and use the
“UP”
and
“DOWN”
buttons to select the between
“ON”
(IR receiver on) and
“OFF”
(IR receiver off).
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Backlight setting:
To access the units backlight setting, press
“MENU”
to show
“OTHER BLGT”
on the LCD display. Use the
“UP”
and
“DOWN”
buttons to select the between
“ON”
(backlight on) and
“OFF”
(backlight goes off after
20 seconds). Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Wireless DMX setting:
To access the units Wireless DMX setting, press
“MENU”
to show
“OTHER WIFI”
on the LCD display.
Use the
“UP”
and
“DOWN”
buttons to select the between
“ON”
and
“OFF
.
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Reset factory settings:
To reset the unit back to its factory settings, press
“MENU”
to show
“OTHER BLGT”
on the LCD display.
Press the
“ENTER”
button twice to show
“SYSRESET”
on the LCD display. Press both the
“UP”
and
“DOWN”
buttons together and the unit will reset to factory settings.
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
