www.prolight.co.uk
150W COB CW/WW Par
User Manual
7
Operating instructions
Master/slave mode:
To set the master unit, press the
“MENU”
button on the rear of the master unit then select your
desired program (sound active or dimmer modes). To set the other units in slave mode, press the
“MENU”
button on the rear of the unit to show
SLAu
on the LED display and press the
“ENTER”
button to confirm the setting. The units will now run in sequence with the master unit.
To exit out of any of the above options, press the
“MENU”
button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Manual dimming mode:
To access the manual dimming mode, press the
“MENU”
button until the display shows
h.255
on the
LED display. Use the
“UP”
and
“DOWN”
buttons to select the required brightness of warm white from
h.000
~
h.255
. Press the
“ENTER”
button and then use the
“UP”
and
“DOWN”
buttons to select the
required brightness of cool white from
C.000
~
C.255
. To adjust the flash speed press the
“ENTER”
button and then use the
“UP”
and
“DOWN”
buttons to select any value from
F5.00
~
F5.15
.
Press the
“ENTER”
button to confirm the setting.
Value: 000 - 255 (000 = low brightness, 255 = high brightness)
Value: 00 - 15 (00 = no flash, 15 = fast flash speed)
To exit out of any of the above options, press the
“MENU”
button.
Static colour:
To access the static colour mode, press the
“MENU”
button until the display shows
CL00
on the LED
display. Use the
“UP”
and
“DOWN”
buttons to select the required static colour from
CL00
~
CL08
.
To adjust the flash speed press the
“ENTER”
button and then use the
“UP”
and
“DOWN”
buttons to
select any value from
F5.00
~
F5.15
. Press the
“ENTER”
button to confirm the setting.
Value: 00 - 15 (00 = no flash, 15 = fast flash speed)
To exit out of any of the above options, press the
“MENU”
button.
Display backlight:
To access the display backlight setting, press the
“MENU”
button until the display shows
don
on the
LED display. Use the
“UP”
and
“DOWN”
buttons to select either
don
(display backlight on) ~
doff
(display backlight off). Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Display inverse:
To access the display inverse setting, press the
“MENU”
button until the display shows
don
on the
LED display. Press the
“ENTER”
button to display
Stnd
and use the
“UP”
and
“DOWN”
buttons to
select either
Stnd
(display standard) ~
(display inverse).
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
rEv
