Page 4
Guided tour of the LUD 36
1.
Power On (Green) LED
. (Seen through side casing).
2.
Mains Input.
90V – 250V AC
3.
LED output socket.
The LED fixtures are connected to this socket
with RJ45’s. (Max Load 36 LED’s.)
4.
DMX Out/Thru socket
. Connects RJ45 data cable to input of next DMX
unit. (When using an XLR socket, you will need a converted data
cable.)
5.
DMX Input socket
. Connects RJ45 data cable either from a DMX
controller, LUD 36 or other DMX controlled device. (When using an XLR
socket, you will need a converted data cable.)
6. Dipswitches.
If you are using the DMX input, the switches set the DMX
address for the power supply to respond to. If using stand-alone mode
switch 10 sets the solid colour scroll mode of the unit; Switch 10+9 sets
static colours; Switch 10+8 sets pastel colour scroll. (See page 4 for full
switch settings.)
7. DMX Indicator.
Illuminates when DMX signal is received.
Fig 1.1
Page 17
NOTES
