5
3.
Set the DMX value of
channel 2
from 0-99,then you will see
the second number of the Address change to (channel 2
value)/10.
For example
, when set the value of channel 2 to 30,the first
DMX address number will be 2(30/10=3),
4.
Set the DMX value of
channel 3
from 0-99,then you will see
the third number of the Address change to (channel 3
value)/10.
For example
, when set the value of channel 1 to 40,the first
DMX address number will be 3(40/10=4),
And the DMX address you set by controller will be 234.
5.
Set the DMX value of
channel 4
to 255,then you will save the
DMX address settled by the controller.
Caution: It won’t save the address if the address number
is over 512
6.
set the value of channel 5-8 out of the value range show on
the step 1,and the device will exit the setting address mode
2. Config.
Setting DMX mode
press
ENTER
button when show the
channel
menu, then
select the DMX mode by pressing
[UP]
or
[DOWN]
button.
Keep Screen On
press
ENTER
button when show the
Keep Screen On
menu,
then select Enable or Disable to keep the screen on by
pressing
[UP]
or
[DOWN]
button.
Output Inverse
press
ENTER
button when show the
Output Inverse
menu,
then select Normal or Inverse by pressing
[UP]
or
[DOWN]
button.
Keep DMX Data
press
ENTER
button when show the
Keep DMX Data
menu,
then select Enable or Disable to keep DMX Data by pressing
[UP]
or
[DOWN]
button.
White Balance
Содержание moviSpark StrobeLine
Страница 1: ...USER MANUAL...