O P E R A T I O N M A N U A L
11
STEP 3:
Click Sender Setup in Figure 3-1 to show the screen as Figure 3-2, click Select Sender, and then Detect Player’s IP to
show player’s IP.
STEP4:
Click Size and Position, seeing Figure 4-1, in the Sender Setup list.
The Player’s IP showed in Figure 3-3 is as an example only.
The screen will show as Figure 4-2.
Set the “Width” and “Height” as shown in Figure 4-2. Here
takes the light box with 16 columns and 12 rows as an
example, for the LED quantities in each light panel are 16X16,
so the width here is 16X16 (256), and the height is 16X12 (19).
Click Save after setting.
Click Apply in Figure 3-4.
Figure 3-1
Figure 3-2
Figure 3-3
Figure 4-1
Figure 3-4
Figure 4-2
301 Thor Place, Brea, CA 92821 |
tel
(714) 256-2111 |
fax
(714) 256-2118 | [email protected] |
www.ledconn.com
Specifications are subject to change without notice. © 2020 LEDCONN CORP. All Rights Reserved.
OM.20.01.R0
LUXDA ZZLE
™
Dynamic Motion Lighting
RGB
