manualshive.com logo in svg

Ledco Econocraft 44, Инструкция по эксплуатации

Поделиться
Скачать
Ledco Econocraft 44 Скачать руководство пользователя страница 5

 

3

 
 
1-1   SAFETY   PRECAUTIONS 

DO NOT OPERATE THIS MACHINE UNTIL YOU HAVE READ AND FULLY 

UNDERSTOOD  THE  FOLLOWING  SAFETY  PRECAUTIONS. 

 

*If the equipment described in this manual is used in a 

manner not specified by the manufacturer, the 

protection provided by the equipments safety devices 

may be impaired 

 

1.  Never operate this machine without reminding yourself that a laminator 
is a powerful and potentially dangerous tool.  If misused, used carelessly, 
or used without observing the rules of safe operation, very serious injury 
can result. 

 

2.  Never operate this machine without all guards, housings, safety shields, 
stop switches or other safety devices in place and fully operational.

 

 

3.  Never operate this machine unless you have been fully trained and have 
received and understood all operating instructions.  Make sure you know 
how the machine works and how it is controlled.

 

 

4.  Never operate this machine if it is not working properly or if you notice 
any abnormality in its performance.

 

 

5.  Never tamper with, rewire, or bypass any control or safety device on this 
machine

. 

 

6.  Always keep all parts of your body and clothing clear of the rollers when 
the power is on.

 

 

7.  Never attempt to clean the laminating rollers when the power is on.

 

 

8.  Never remove the machine housing or attempt any kind of maintenance 
without disconnecting power to the unit.

 

 

9.  Always be sure all persons are clear of the machine before advancing or 
reversing the pressure rollers, especially when multiple operators or 
observers are present.

 

 

10. Never wear loose clothing, ties, jewelry or any item which could be 
caught in the rollers or machinery when operating the machine.  Operators 
with long hair must put their hair up before running the machine.

 

 

11.  Always keep your hands clear of any slitter mechanism or blade except 
when the power is off and you intend to adjust the mechanism or change a 
blade.

 

Содержание Econocraft 44































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды