Press button
for 2 seconds to switch between
Synchronous color
move and Asynchronous color changing when multiple different receivers are
in the same mode. Synchronous color changing means the starting point and
ending point are at the same time, Asynchronous color changing means there is
certain time delay of the starting point and ending point, the later receiver start
or ending point is always later than the previous receiver. For example,
Receiver 1,2,3,4,5 changing together under mode 1, if it is Synchronous color
changing, all of the receivers change will start and end at the same time. If it is
Asynchronous color changing , then receiver 1 will start change firstly , then
follows by receiver.2 , and later by receiver 3 and receiver 4 and receiver
5 …and recycle to receiver 1 …….The purpose of asynchronous color change
is to achieve the color changing effect which looks like water chasing .
5.4 Usage of ON/OFF
5.4.1 Press of ON/OFF button
for turning ON/OFF receiver.
5.4.2 Press ON/OFF button
for more than 2 seconds, it can reveal
white light output, each channel is 100% output.
5.5 The usage of number button
5.5.1 Press on number button for choosing the corresponding receiver, E.g. to
adjust the brightness of receiver 1, you need to press 1 button
, then
13
Содержание Easy RGB(Y)
Страница 2: ...Fig 1 2 Fig 2...
