manualshive.com logo in svg

Ledco 44" Pouch, Руководство по эксплуатации

Поделиться
Скачать
Ledco 44

4.4  MOUNTING

When ready to mount, please follow these easy steps:

1. 

Turn on your machine by pressing the ON SWITCH.

2. 

Set to recommended temperature of 350 degrees.

3. 

Allow the machine to heat for approximately 35-45 minutes.

4. 

Check item to be mounted and mounting board to make sure there are no for-

eign particles on the surface.

5. 

Place mounting board on flat surface and place item to be mounted on the ad-

hesive side of board. Make sure item is square to edges of board.

6. 

Tack item to board using a heat seal iron or glue stick. Tack only the front two 

corners of the item.

7. 

SET MACHINE GAP OPENING TO THE THICKNESS OF THE MOUNTING 

BOARD (example 3/16” board = 3/16” gap) by pulling out Gap Knob on right side of 

machine and turning to the proper setting (Pull out to set and then push in to hold).

8. 

Place release sheet over entire surface (silicon side down). This prevents adhe-

sive from adhering to the rubber roll.

9. 

Insert board into laminator (tacked edge FIRST). 

10.  The item will be mounted at a speed of one foot per minute.

11.  Remove board from laminator as soon as it is ejected from machine.

12.  Lay on flat surface until cool to touch.

14 

Содержание 44" Pouch


















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды