10 | BA PROFILED DC_ . BA 11/2019
When mounting the luminaire, make sure that the luminaire is
fastened securely and stably. If the luminaire falls down, its weight
poses a risk of
injury!
4 | Assembly and Mounting
Check the LED luminaire before installation to ensure it is complete and shows no
signs of damage. Do not use the luminaire or accessories if they are damaged, as
there is a risk of injury.
The LED luminaire comes fully assembled. Optional there are following mounting ac-
cessories for this luminaire:
Item no.
Luminaire bracket PROFILED und SYSTEMLED for T-slots, pair 240400-01
Luminaire bracket PROFILED und SYSTEMLED for rotatable
mounting , pair
240400-02
5 | Connection and initial operation
Suitable connection material, cables and accessories can be found in the accessory
range of LED2WORK.
Schematic drawing of M12 plug
4
3
1
2
5
Possible variants of the M12 connector
PIN allocation
PIN 1 = 24V DC
PIN 2 = not used
PIN 3 = GND
PIN 4 = 24V DC
PIN 5 = not used
PIN 3 = 0V DC. 24V DC for supply can be connected to PIN 1 or
PIN 4. It is not necessary to assign both PINs (PIN 1 and PIN 4) at
once!
PIN assignment of the M12 connector is as follows:
