LT-995 DMX/RDM Decoder Manual
PRODUCT SPECIFICATIONS
Power Supply
Input Voltage
Max Current Load
Max Output Power
Photoelectric Isolation
Grey Level
Protection
Output DMX Channel
DMX512 Socket
Working Temperature
Dimension
Weight (G.W)
DC Constant Voltage Class 2
DC 12V~DC 24V (Use only with Class 2 regulated Power supply)
6A x 5CH (Max. 30A)
(0~72W...144W) x 5CH (Max. 720W)
Yes
8 bit (256 levels) / 16 bit (65536 levels)
Short circuit/ Over temperature / Over current protection, Automatic recovery
5 CH/RDM
XLR-3, Rj45, Green Terminal
-30°C ~ 50°C (-22°F ~ 122°F)
L 169 x W 80 x H 39 mm (6.65” x 3.14” x 1.53”)
1.21 lb
This product is intended to be installed and serviced by a qualied licensed electrician. Install in accordance with the National Electric Code, and
local regulations. Disconnect power before installing or servicing.
Only power with a regulated (listed) constant voltage Class 2 power
supply (12-24V DC).
Ensure applicable wire is installed between driver, xture and any controls in between. When choosing wire, factor in voltage drop, amperage
rating and type (in-wall rated, wet location rated, etc.). Inadequate wire installation could overheat wires and cause re.
This product is rated for indoor installation and only for dry locations. Avoid direct sun light.
Do not modify this product beyond the instructions in this guide or the warranty will be voided.
Wiring diagrams in this installation guide for basic installations. Please carefully review your installation before proceeding
SAFETY & WARNINGS
BEFORE YOU BEGIN, READ ALL WARNINGS AND INSTALLATION INSTRUCTIONS AND SAVE FOR FUTURE USE.
1/4
Copyright © 2019 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 1.0 12/02/19
1-800-387-4081
ledworldlighting.com ledworld.ca
PRODUCT FEATURES
·
5 output channels, Max 6A per channel. Up to 720W output
·
Easy operation with digital display and the touch buttons.
·
3-pin XLR, Rj45 and Terminal DMX ports connectivity
·
With RDM remote management protocol, the operations can be
completed via RDM master console such as parameters browsing and
setting, DMX address setting and equipment recognition
·
Short circuit, Over temperature and Over current protection
·
Self testing function
·
Optional High/Low PWM frequency
·
Optional 16bit (65536 levels) / 8bit (256 levels) grey level
·
Firmware upgrade function
