5/5
IMPORTANT INSTRUCTIONS
Wrong!
4"
(100mm)
On widest one flat plane (only)
Do not bend sideways.
Flexible on one axis
maximum band radius 4”
MAXIMUM FLEXSTRIP LENGTH SUPPORTED BY OUR CLASS 2 POWER SUPPLY
Power Supply
Max Feet of LED Flexstrips
Power Supply
Max Feet of LED Flexstrips
CVN96L24DC
20.75 Feet (Continuous 77 Watts)
XLD200B-224V-FC
2 X 21.6 Feet (Each Channel)
Total 43.2 Feet
NANO COATED LED GROW STRIP
™
1-800-387-4081
ledworldlighting.com ledworld.ca
IMPORTANT INSTRUCTIONS
Apply 1 ½” long electrical heat shrink over all connection points. Secure connection wire with wire clamp.
IMPORTANT !
TROUBLESHOOTING
Tape light strip does not light
Ÿ
Make sure your power supply is turned on and has the correct voltage.
Ÿ
Conrm you have the correct polarity (+ to + and - and -) throughout the run of LED Lighting.
Ÿ
Have a electrician check all connections and any switch or dimmer connections from the power supply to the LED Light Strips.
Ÿ
Consider testing with a multimeter to ensure light strip is receiving 24V power.
LED Flex Strip lights blink on, then go off
Ÿ
The power supply is not adequate for the length of LED Light Strips you are powering. Install a adequate Class 2 power supply.
LEDs farthest from the power supply are noticeably dimmer
Ÿ
This is the result of voltage drop. Decrease the length of the 24V power feed or use thicker power feed
wires between the 24V power supply and the
lighting strips
.
Copyright © 2018 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
Model:
HH-S2835P-60-24-5M
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 1.1 - 11/28/18