3/4
CONNECT WITH SOLDERING
Type C Flex Strip comes with protective Silicon cover. It is strongly recommended to solder the connection.
-
Soldered Contacts
LED STRIP CUTTING
Our strips comes with cut mark sign. Strips are be cuttable at each 6 LEDs. Cut
marks lying between set of soldering points.
-
-
-
-
INPUT
120V AC 60Hz
Regulated Class 2 Power Supply
24VDC LED Flexstrip
+
-
Figure shows LED Flexstrip
connected to a Regulated Class 2
Power Supply
POWERING OPTION
IMPORTANT NOTE
Polarity marks must match
((+) to(+) and (-) to (-))
otherwise strip will not work
LAYOUT OPTIONS
Note: Always check the Wattage of your LED Strip or Fixture.
Power Supply Wattage x 0.8 = Available Wattage
Class 2 Power Supply
Layout 2
40W
18W
Available 80W
18W
Class 2 Power Supply
Layout 3
40W
18W
Available 80W
18W
24VDC (100W)
24VDC (100W)
Class 2 Power Supply
24VDC (100W)
Class 2 Power Supply
Layout 1
38W
38W
50W
50W
Available 80W
Available 80W
24VDC (100W)
Layout with Overload
!
Do Not Use
Securely mount wires
using wire clamps
LED FLEX STRIP - Bright Plus
Model
: FC60M28-10M-24V-X (X = COLOR W:Neutral White / WW:Warm White)
1-800-387-4081
ledworldlighting.com ledworld.ca
|
Copyright © 2021 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 4.2 - 10/15/21
