4/4
CONNECT WITH RGB STRIP CONNECTOR CORD
Another option for quick, easy and exible connection between RGB
LED strips is our RGB Strip Connector Cord. RGB Strip Connector
Cord are useful option in application where you want to easily joint
light strips over separated surfaces, such as between kitchen cabinet.
Note: Diagram below shows 2 wire, but RGB strip will have 4 wires
Apply 1 ½” long electrical heat shrink over all connection points. Secure connection wire with wire
clamp.
IMPORTANT !
Wrong!
4"
(100mm)
On widest one flat plane (only)
Do not bend sideways.
Flexible on one axis
maximum band radius 4”
R
G
B
R
G
B
R
G
B
R
G
B
RGB Connector Cord
TROUBLESHOOTING
Ÿ
The power supply is not adequate for the length of LED Light Strips you are powering. Install a adequate Class 2 power supply.
LED Flex Strip lights blink on, then go off
Ÿ
Have a electrician check all connections and any switch or dimmer connections from the power supply to the LED Light Strips.
Ÿ
Conrm you have the correct polarity (+ to + and - and -) throughout the run of LED Lighting.
Ÿ
This is the result of voltage drop. Decrease the length of the 12V power feed or use thicker power feed wires between the 24V power supply
and the lighting strips.
Ÿ
Consider testing with a multimeter to ensure light strip is receiving 24V power.
LEDs farthest from the power supply are noticeably dimmer
Tape light strip does not light
Ÿ
Make sure your power supply is turned on and has the correct voltage.
IMPORTANT NOTE
Polarity marks must match
otherwise strip will not work
R
G
B
G
+
R B
G
+
R B
G
IMPORTANT INSTRUCTIONS
MAXIMUM FLEXSTRIP LENGTH SUPPORTED BY LED WORLD’s CLASS 2 POWER SUPPLY
SIDE EMITTING RGB LED FLEX STRIP
1-800-387-4081
ledworldlighting.com ledworld.ca
|
Model
: FA-SV4713-108-24-RGB
Copyright © 2022 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 1.0 - 12/07/22
Power Supply
Max Feet of LED Flexstrips
Power Supply
Max Feet of LED Flexstrips
19.25 Feet (Continuous 77 Watts)
MD-024-096VTDHV2
MD-024-060VTDHV2
12 Feet (Continuous 48 Watts)
MD-024-192VTHD52JV2
2 X 19.25 Feet (Continuous 77 Watts
each channel)
MD-024-288VTHD52JV2
3 X 19.25 Feet (Continuous 77 Watts
each channel)
