VR1000 8w Quad Colour RGBW User Manual
Specifications
Input Voltage: 100
– 240v AC 50-60Hz
Power Consumption: 65w
Weight: 5.2kg
Dimensions: 1000mm x 75mm x 80mm (plus Brackets)
Beam Angle: 40deg
LED’s: 12 x 8w Quad-Colour
DMX Connections: 3 pin male / female flying leads with IP65 rated connectors
Mains Link: 4 pin male / female flying leads with IP65 rated connectors
Infra
– Red Remote Control Sensor
Features
Infra Red Remote Control (Using optional VRIR remote Transmitter)
Compatible with LED Technologies Optional RGBW Easy Controller
Stand Alone / Master Slave
DMX 512 Controllable (4, 5, 6 & 7 x Channels)
410Hz LED Driver Chips for Flicker Free Operation when using Video Equipment
Power & DMX Link
IP65: Rated for Outdoor Use
Mains and DMX Linkable
Low Power Consumption
Rubberised easy wrap cable
(Optional Data & Power link leads are available in various lengths).
Introduction
Thank you for choosing the VR1000 8w Quad-Colour RGBW Lighting Baton.
Prior to use, please read all the instructions carefully paying particular attention
to the installation of this product.
By following the suggestions found in this user manual you can look forward to
long and reliable service of your new product.
Unpacking, Inspection and Installation
Please check that the following items are included in your packaging. If anything
is missing please contact your dealer.
VR1000 8w Quad-Colour RGBW Baton
• Power cord with 13A mains plug
Carefully remove all packaging materials from the box, ensuring that all foam
padding is discarded responsibly.
This unit can be mounted and operated at any angle; however we would
recommend using a suitable safety chain if the unit is to be installed above head
height. As little or no heat is generated by the unit it can safely be installed
behind marquee linings and drapes.
