LED-POL ORO-ATLAS-2XT8120-G, Инструкция по эксплуатации

Страница: 6 / 14

BEFORE STARTING ANY FIXING PROCEDURE, PLEASE MAKE SURE THE POWER
SUPLAY IS SWITCHED OFF!
INSTALING THE LAMP:
1. Using a screw driver lever then release the clamp holding the diffuser to the
base.
2. Take diffuser off.
3. Open safety bindings and take the panel holding ignition device off.
4. Mark the position off fixing the base to the surface.
5. Drill necessary holes.
6. Lead the power wires through a cube gutter in the base of the fixing.
7. Fix the fixture by screwing it to the surface.
8. Connect the power wires to a special connector strip located in the base.
9. Install the panel with holds the ignition devices and lock the security bind-
ings
10. Install the diffuser and lock it with the bindings.
CHANGING THE FLUORESCENT TUBE:
1. Using a screw driver lever then release the clamp holding the diffuser to the
base
2. Take diffuser off.
3. Change the broken fluorescent tube.
4. Install the diffuser and lock it with the bindings.
EN
ORO-ATLAS-2XT860-G ORO-ATLAS-2XT8120-G ORO-ATLAS-2XT8150-G
POWER SUPLY
~230V / 50 Hz ~230V / 50 Hz ~230V / 50 Hz
POWER
2 x18W / T8 LED 2 x36W / T8 LED 2 x54W / T8 LED
LENGTH L
WIDTH W
HEIGHT H
660mm
112mm
70mm
1260mm
96mm
80mm
1560mm
96mm
80mm
HANDLE
G13 G13 G13
WATERPROOF FLUORESCENT LAMP