www.ledneonflex.com
www.GLLS.com
Swivel Connector & End Cap Assembly
15
Fig. 3
Fig. 2
Fig. 1
Fig. 4
Swivel Connector
PCB
PVC Tape
Expanding Tool
Placement
Inserting the expanding tool into the
front side of PCB will damage the light
03 |
Installation Steps
03.1 |
Creating a gap for the Lead Connector
Insert the expanding tool behind the PCB.
Move the tool up and down 3 to 5 times
gently to create a small gap.
NEVER insert the expanding tool into the
front side (LED side) of the PCB.
03.2 |
Inserting the Lead Connector
Rotate the steel plate so it is aligned
straight with the pin connector (Fig. 1).
Carefully insert the pins of the lead
connector into the gap you created behind
the PCB (Fig. 2).
DO NOT
insert the pins into the front side
of the PCB. (Fig3)
DO NOT
split the pins around the PCB
(Fig.4).
