6) Installing and using the device
Remove the wall bracket by sliding it off the device.
The device can be mounted on a ‘flat’ surface. To mount the device, use the holes
in the wall bracket to mark the place you want to install the device. Drill holes at the
marked positions and push the mounting plugs into the drilled holes. Then use the
screws to mount the bracket.
Remove the front cover of the device by rotating it counterclockwise.
Open the back cover of the battery compartment.
Insert 4 ‘D cell’ batteries, respecting the polarities in the battery compartment.
Replace the cover of the battery compartment.
Turn the power switch to the
“ON”
position. The light sensor will automatically switch
on the device when it gets dark.
EN 03