VarioControl LINEARdrive 180D – 06/08/2013
M
Max | Vdc+
32V | Vdc-
Ext in +
Ext in
DMX in +
DMX in -
DMX in shield
LedSync thru +
LedSync thru -
LedSync shield
TC
1
2
3
Group
Group
Group
Group
LED
LINEARdrive 180D
-
4
12-28V / 6A Direct voltage controlled LED driver
LED groups
R
R
W
R
B
G
R
R
DMX in shield
DMX in +
DMX in -
Ext in +
Ext in -
{
12 – 28 V DC IN
-
+
LedSync shield
LedSync thru +
LedSync thru -
CAUTION: The device may only be connected and installed by a qualified electrician. All applicable regulations, legislation and build-
ing codes must be observed. Incorrect installation of the device can cause irreparable damage to the device and the connected LEDs.
12 V – 28 V DC IN
To connect the driver to a DC power supply unit (PSU), con-
nect the PSU’s positive voltage supply wire to the VDC+ con-
nector and the PSU’s negative voltage supply wire to the VDC-
connector.
EXT in
You have the possibility to connect an external control device
(0 – 10 V control device, 10 k
Ω
potentiometer or show selection
switch) to the driver’s Ext in+ and Ext in- connector. Configure
the driver for use with an external control device over the
3-button user interface.
DMX in/LedSync thru
Use these connectors when the driver is used in a DMX net-
work.
For DMX in, connect the network cable’s data+, data- and
shielding wire (the orange/white, orange and brown wire in a
CAT5 cable) to the DMX in+, DMX in- and DMX in shield con-
nector respectively.
For LedSync thru, connect the network cable’s data+, data-
and shielding wire (the orange/white, orange and brown wire
in a CAT5 cable) to the LedSync thru+, LedSync thru- and
LedSync shield connector respectively.
LED groups
Indicates the location of the connectors for your LED groups.
R(ed) represents channel 1, G(reen) represents channel 2,
B(lue) represents channel 3 and W(hite) represents channel 4.
The default group color allocation can be changed over the
3-button user interface.
2
1
0.2 – 1.5 mm
2
2
1
9 mm
0.35 inch
0.5 – 1.5 mm
2
AWG 20 – 16
9 mm
0.35 inch
AWG 24 – 16
VDC and LED connectors:
Other connectors:
VarioControl LinearDrive 180D – Wiring diagram
