INSTALLATION INSTRUCTIONS
MODELS:
CONTOUR 0036
2
(4)
LED Linear
™
USA, Inc. |
Edition: 13/09/2019
|
LED LINEAR RESERVES THE RIGHTS TO CHANGE SPECIFICATIONS WITHOUT NOTICE
ATTENTION
Please read all safety and assembly instructions prior to installation and keep for future reference.
Installing Endcaps
Feed the lead wires through or behind the endcap. Add Super Glue inside
and around end cap to secure it in place. For select models, use torque bit
to screw the endcap. If applicable, secure the Quick Connector by adding
super glue and pressing it onto the extrusion.
5
Super Glue
End Cap
End Cap
Overview of Horizontal Installation
Overview of Vertical Installation
The mounting profile is installed directly on existing studs.
The mounting profile is installed on horizontal structure (prepared by others).
II. INSTALLATION ON 1/2" DRYWALL
(NOTE: Profile is not suitable for mitering corners. Straight installations only.)
Studs
Horizontal Structure
by others
1/2" Drywall
Mounting Profile
Plaster
(90° Rotated View)
Stud
1/2" Drywall
Mounting Profile
