Technical specification:
Dimensions:
Information for the Product user
1. Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE
marked with crossed out wheelie bin symbol).
2. Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for
waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
3. This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important
that it is separated from normal household waste and recycled in the WEEE chain
4. The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste,
but should be disposed of according to local WEEE regulations
Issue 1 261112
1350W HIGH SPEED HAND DRYER
R1350HSD
Please read instruction before commencing installation and retain
for future reference.
Model No.:
Dimensions:
Fixing centres:
Power:
Supply Voltage:
IP:
Weight:
Working Temperature:
Automatic Switching:
Over heat protection:
R1350HSD
W267mm x H225mm x Depth195mm
4 holes in base plate, upper holes at 128mm centres, lower
holes 184mm centres (113.5mm below upper holes)
1350W
230V-240V~ 50Hz
22
3.75KG.
5°C<ta<40°C
Infra-red beam detects hand within 15cm of air outlet,Auto
switch off after max. 60 seconds
Self-restting bimetal thermostat on heater with thermal
fuse back-up if bimetal fails
Aluminium main body
Controlled by PIR, operateds when hands are 15cm or closer to hand dryer
Effcient high speed motor
Streamline nozzle concentrates warm air to dry hands quickly
Protection against electric shock: Class I (Must be earthed)
225mm
195mm
267mm
The Installation must be carried out by an electrician
LED Group
Western Retail Park
Tel: +353 1 7099000
Nangor Road
Fax: +353 1 7099060
Dublin 12
Email: [email protected]
Ireland
Website: www.led.ie
Page 1
ISO 9001:2008
Q UAL IT Y ASSU RED CO MPANY
Warning! To prevent overheating, the air inlet or outlet must not be obstructed
Suitable for mounting on normally flammable surface
Minimum distance from obstruction below outlet is 0.5 metre
Complies with EN60335 -1,EN60335-2-23,EN62233,EN55014-1,EN55014-2,
EN61000-3-2,EN61000-3-3,