SERVICE AND REPAIR
If your system malfunctions, you should attempt to correct or isolate the trouble before concluding that the
equipment needs repair. Make sure you have followed the setup procedure and operating instructions. Check
out the inter-connecting cords and then go through the TROUBLE SHOOTING section in the manual
We strongly recommend that you
do not
try to repair the equipment yourself and
do not
have the local repair
shop attempt anything other than the simplest repair. If the repair is more complicated than a broken wire or
loose connection, send the unit to the factory or an authorized service center equipped to service the UCR195
receivers. Don’t attempt to adjust any controls inside the units. Once set at the factory, the various controls
and trimmers do not drift with age or vibration and never require readjustment.
There are no adjustments
inside that will make a malfunctioning unit start working
.
LECTROSONICS service department is equipped and staffed to quickly repair your equipment. In-warranty
repairs are made at no charge in accordance with the terms of the warranty. Out of warranty repairs are
charged at a modest flat rate plus parts and shipping. Since it takes almost as much time and effort to deter
mine what is wrong as it does to make the repair, there is a charge for an exact quotation. We will be happy to
quote approximate charges by phone for out of warranty repairs.
RETURNING UNITS FOR REPAIR
You will save yourself time and trouble if you will follow the steps below:
A. DO NOT return equipment to the factory for repair without first contacting us by letter or by phone. We
need to know the nature of the problem, the model number and the serial number of the equipment. We also
need a phone number where you can be reached 8 am to 4 pm (Mountain Standard Time).
B. After receiving your request, we will issue you a return authorization number (R.A.). This number will help
speed your repair through our receiving and repair departments. The return authorization number must be
clearly shown on the outside of the shipping container.
C. Pack the equipment carefully and ship to us, shipping costs prepaid. If necessary, we can provide you with
the proper packing materials. UPS is usually the best way to ship the units. Heavy units should be “double
boxed” for safe transport.
D. We also strongly recommend that you insure the equipment, since we cannot be responsible for loss of or
damage to equipment that you ship. Of course, we insure the equipment when we ship it back to you.
Mailing address:
Shipping address:
Telephones:
Lectrosonics, Inc.
Lectrosonics, Inc.
(505) 892-4501
PO Box 15900
581 Laser Rd.
(800) 821-1121
Rio Rancho, NM 87174
Rio Rancho, NM 87124
FAX: (505) 892-6243
USA
USA
Web:
email:
10