Lectrosonics Octopack, Инструкция по эксплуатации

Страница: 8 / 20

OCTOPACK
LECTROSONICS, INC.
8
Receiver Installation
First install the SRUNI rear panel adapter.
The mating 25-pin connector inside each slot on the
Octopack provides power and audio connections.
Gently insert the receivers into the slots. A guide
around each internal connector centers the housing to
align the connector pins.
Plastic inserts are provided to cover empty slots. Sock-
ets in the insert are sized to store loose antenna leads.
Sockets in the slot covers are provided to store unused
RF leads and keep the right angle connectors clean.
“B” coaxial feeds “A” coaxial feeds
“A” antenna inputs “B” antenna inputs
RF leads are connected to the receivers in a criss-
cross pattern to avoid sharp bends in the cables. The
leads are marked on the control panel as B on the
left and A on the right side of each slot. The antenna
inputs on the receivers are the opposite, with A on the
left and B on the right. The right angle connectors help
to maintain a low profile and visibility of the LCDs on
the receivers.