Lectrosonics LMb, Инструкция по эксплуатации

Страница: 7 / 24

Digital Hybrid Wireless
®
UHF Belt Pack Transmitter
Rio Rancho, NM
7
Powering On in Standby Mode
A brief press of the Power Button , releasing it
before the counter has reached 3, will turn the unit on
with the RF output turned off. In this Standby Mode,
the menus can be browsed to make settings and
adjustments without the risk of interfering with other
wireless systems nearby.
Hold
for
Rf On
...1
Release Power
Button before
the counter
reaches 3 to
enter standby
mode
5
494.500
-40
-20 0
1
b 19
RF indicator blinks
After settings and adjustments are made, press the
power button again to turn the unit off.
NOTE: Also see the section entitled Power
Menu for the AutoOn feature.
Powering Off
Powering
Off . . .
1
From any screen, power can be
turned off by selecting Pwr Off in
the power menu or holding the
Power Button in and waiting for
the countdown, EXCEPT if the top
panel switch is configured for this
function.
If the power button is released, or the top panel
switch is turned back on again before the countdown
is completed, the unit will remain turned on and the
LCD will return to the same screen or menu that was
displayed previously.
NOTE: When the top panel switch is configured
as a power switch, that is the only way to turn
the unit off.
Navigating Menus
The LCD and keypad interface make it easy to
browse the menus and make the selections for the
setup the user needs. When the unit is powered up
in either the operating or the standby mode, press
MENU/SEL on the keypad to enter a menu structure
on the LCD. Use the and arrow buttons to select
the menu item. Then press the MENU/SEL button to
enter the menu.
The prompt in the upper right corner may
display one or both arrows, depending upon
what adjustment can be made. If the changes
are locked, a small padlock symbol will appear.
Gain
Freq.
ProgSw
Compat
-40 -20 0
Gain
25
Locking/Unlocking Changes to
Settings
Changes to the settings can be locked.
StepSiz
Phase
Locked
Backlit
Locked?
No
Yes
-40
-20 0
Gain
25
A small padlock symbol will appear on adjustment
screens when changes have been locked.
When changes are locked, several controls and ac-
tions can still be used:
• Settings can still be unlocked
• Menus can still be browsed
• Programmable switch still works
• Power can still be turned off by using the power
menu or removing the batteries.
Power Menu Options
A special options menu is provided by pressing the
power button quickly when the unit is turned on
in either the Operating or Standby modes. Use the
and arrow buttons to select the menu item.
• Resume - returns to the previous mode and
screen
• Pwr Off - turns the unit off
• Rf On? - enters a screen to enable the operating
or standby modes
• AutoOn? - allows the unit to automatically turn
back on after a power failure or when fresh bat-
teries are installed (works in the operating mode
only)
• Backlit - adjusts the duration of the LCD back
light to 30 seconds or 5 minutes, or to remain on
• LED Off - turns the LEDs on (Normal) or off (Dark)
• About - displays the installed firmware version
• Blk606? - Band B1 and C1 LMb transmitters
can be used with legacy Block 606 Lectrosonics
receivers by invoking a special Block 606 legacy
mode (Introduced in Firmware version v2.12) so
that the correct pilot tones will be present. Use
the and arrow buttons to select Legacy and
press MENU/SEL to save.
NOTE: Neither Band B1 nor Band C1 includes
all Block 606 frequencies.
“Legacy” refers to SRb/E01-606 receivers, as
well as the original Venue (VRMWBL with VRS/
E01-606 modules).