Digital Plug-On Transmitter
Rio Rancho, NM
7
Operating Instructions
MENU/SEL Button
BACK Button
Modulation
LEDs
PWR LED
UP Arrow
DOWN
Arrow
KEY LED
POWER Button
Turning Power ON
Powering On in Operating Mode
Press and hold the
POWER
Button briefly until the prog-
ress bar on the LCD finishes.
When you release the button, the unit will be operational
with the RF output turned on and the Main Window dis-
played.
Hold
for
Rf On
DPr
00 : 02 : 37
-20
+0
470.100
-40
RF indicator not blinking
Hold power
button until
the progress
bar finishes
Powering On in Standby Mode
DPr
00 : 02 : 37
-20
+0
470.100
-40
RF indicator blinks
A brief press of the
POWER
button
and releasing it before the progress
bar finishes, will turn the unit on with
the RF output turned off. In this
Standby Mode the menus can be
browsed to make settings and
adjustments without the risk of
interfering with other
wireless systems nearby.
Powering Off
Powering
Off...
To turn the unit off, hold the
POWER
Button in briefly and wait for the
progress bar to finish. If the
POWER
button is released before the progress
bar finishes, the unit will remain turned
on and the LCD will return to the same
screen or menu that was displayed
previously.
Transmitter Operating Instructions
• Install battery(s)
• Turn power on in the Standby mode (see previ-
ous section)
• Connect microphone and place it in the position
where it will be used.
• Have the user talk or sing at the same level that
will be used in the production, and adjust the
input gain so that the
-20 LED blinks red on
louder peaks
.
Input...
Gain
Rolloff
Polarity
-40
-20
+0
Gain
22
Use the UP and DOWN
arrow buttons to adjust
the gain until the -20
LED blinks red on
louder peaks
Signal Level
-20 LED
-10 LED
Less than -20 dB
Off
Off
-20 dB to -10 dB
Green
Off
-10 dB to +0 dB
Green
Green
+0 dB to +10 dB
Red
Green
Greater than +10 dB
Red
Red
• Set the frequency to match the receiver.
• Set encryption key type and sync with receiver.
• Turn the power off and then back on while hold-
ing the
POWER
button in and waiting until the
progress bar finishes.