Digital Hand Held Transmitter
Rio Rancho, NM
5
Battery Installation
To insert batteries, close the eject lever and insert the
upper contacts first (closest to the mic capsule). Polar-
ity is marked on the label in the bottom of the battery
compartment.
Close
eject lever
to install
batteries
The contacts are very tight to prevent the batteries
from “rattling” as the transmitter is being handled. Pull
the eject lever outward to remove the batteries. The
battery tips will move outward, making them easier to
grasp.
Pull eject lever outward to release batteries from contacts
Control Panel
Six membrane switches on the control panel are used
to set up the transmitter by navigating the menus on
the LCD and selecting the desired values.
Power Button
Modulation
LEDs
Previous
Screen
UP/DOWN Buttons for
Menu Item Selection
Enter Menu and
Select Item
IR Sync Port
Programmable switch
setup button
