Lectrosonics DBSM, Инструкция по эксплуатации

Страница: 4 / 36

DBSM-A1B1, DBSM/E01-A1B1, DBSMD-A1B1, DBSMD/E01-A1B1
LECTROSONICS, INC.
4
Features
Main Window Indicators
The Main Window displays the block number, Standby
or Operating mode, operating frequency, audio level,
battery status and programmable switch function. When
the frequency step size is set at 100 kHz, the LCD will
look like the following.
474.500
-40 -20 0
Frequency (MHz)
Operating mode
Battery status
Audio level
Battery Status LED Indicator
AA batteries can be used to power the transmitter.
The LED labeled BATT on the keypad glows green
when the batteries are good. The color changes to red
when the battery voltage drops down and stays red
through most of the battery life. When the LED begins
to blink red, there will be only a few minutes remaining.
The exact point at which the LEDs turn red will vary
with battery brand and condition, temperature and
power consumption. The LEDs are intended to simply
catch your attention, not to be an exact indicator of
remaining time.
A weak battery will sometimes cause the LED to glow
green immediately after the transmitter is turned on, but
it will soon discharge to the point where the LED will
turn red or the unit will turn off completely.
Some batteries give little or no warning when they
are depleted. If you wish to use these batteries in the
transmitter, you will need to manually keep track of the
operating time to prevent interruptions caused by dead
batteries.
Start with a fully charged battery, then measure the time
it takes for the Power LED to go out completely.
NOTE: The battery timer feature in many
Lectrosonics receivers is very helpful in measuring
battery runtime. Refer to the receiver instructions
for details on using the timer.
Encryption Status LED Indicator Modes
•
StandBy:
Light is OFF and Operating Mode Indica-
tor icon has a line through it
• Missing/Wrong Key: Light is FLASHING
•
Transmitting:
Light is steadily ON
microSDHC
memory card
port
microSDHC
memory card
port
Audio
Input
Jack
Antenna
Port
IR (Infrared) Port
Antenna
Port
Audio
Input
Jack
IR (Infrared) Port
Modulation
Indicators
Battery
Status LED
Encryption
Status LED