Lectronics SPDR Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 20

Lectronics SPDR Скачать руководство пользователя страница 10

LECTROSONICS, INC.

10

Main Menu and Sub Menus

Timecode

TC Jam (jam timecode)

TC Jam

JAM NOW

When TC Jam is selected,

JAM NOW

will blink on

the LCD and the unit is ready to be synced with the

timecode source. Connect the timecode source

and the sync will take place automatically. When

the sync is successful, a message will be displayed

to confirm the operation.
Timecode defaults to zero at power up if no

timecode source is used to jam the unit. A timing

reference is logged into the BWF metadata.

Frame Rate

The frame rate affects embedding of the timing reference in the BWF file

metadata and display of timecode. The following options are available:

• 30

• 23.976

• 29.97

• 30DF

• 25

• 29.97DF

• 24

NOTE: While it is possible to change the frame rate, the most common

use will be to check the frame rate which was received during the

most recent timecode jam. In rare situations, it might be useful to alter

the frame rate here, but be aware that audio tracks many not line up

correctly with mismatched frame rates.

Use Clock

Choose to use the clock provided in the SPDR as opposed to a timecode

source. Set the clock in the Settings Menu, Date & Time on page 12.

NOTE: The SPDR time clock and calendar (RTCC) cannot be relied

on as an accurate time code source. Use Clock should only be used in

projects where there is no need for the time to agree with an external

time code source.

Inputs

Input Level

Press MENU/SEL to select which input to adjust. Adjust the input gain with

the UP and DOWN arrow buttons.

Input Type

Based on the input source, choose Analog or Digital.

«
...
8
9
10
11
12
...
»

Содержание SPDR





















Отзывы:

Нет отзывов