background image

Synthesized VHF IFB Transmitter

Rio Rancho, NM

3

Table of Contents

General Technical Description ............................................4

Introduction .........................................................................4

Audio Input Interface ...........................................................4

Digital Hybrid Wireless

®

 Technology ...................................5

Audio Signal Processing .....................................................5

Pilot Tone Squelch System .................................................5

Frequency Agility.................................................................5

Power Delay ........................................................................5

Microcontroller ....................................................................5

Transmitter ..........................................................................5

Antenna Port .......................................................................5

Front Panel Controls and Functions ...................................6

IFBT4 Front Panel ...............................................................6

OFF/TUNE/XMIT Switch .....................................................6

Power Up Sequence ...........................................................6

Main Window .......................................................................6

Frequency Window..............................................................6

Audio Input Gain Window ....................................................6

Setup Window .....................................................................6

COMPAT Setup Screen .......................................................7

Lock/Unlock Panel Buttons .................................................7

IFBT4 Menu Diagram ..........................................................7

Rear Panel 

Controls and Functions ................................................8

IFBT4 Rear Panel ...............................................................8

XLR Jack .............................................................................8

Power Input Connector .......................................................8

Antenna ...............................................................................8

Input Configuration (Mode Switches) ..................................8

Frequency Selection ............................................................9

Installation and Operation .................................................10

Adjust Audio Input Level ...................................................10

Accessories ........................................................................11

Troubleshooting ..................................................................12

Specifications .....................................................................13

Service and Repair .............................................................14

Returning Units for Repair ................................................14

Consumer Alert for US Users - FCC Order DA 10-92
Most users do not need a license to operate this wireless microphone system. Nevertheless, 

operating this microphone system without a license is subject to certain restrictions: the system 

may not cause harmful interference; it must operate at a low power level (not in excess of 50 

milliwatts); and it has no protection from interference received from any other device.
Purchasers should also be aware that the FCC is currently evaluating use of wireless micro-

phone systems, and these rules are subject to change. For more information, call the FCC at 

1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website 

at www.fcc.gov/cgb/wirelessmicrophones. To operate wireless microphone systems at power 

greater than 50mW, you must qualify as a Part 74 user and be licensed. If you qualify and wish 

to apply for a license go to: http://www.fcc.gov/Forms/Form601/601.html

Содержание IFBT4-VHF

















Отзывы: