manualshive.com logo in svg

LeCroy ZS1000, Инструкция по эксплуатации, Страница: 11 / 48

Поделиться
Скачать
LeCroy ZS1000 Скачать руководство пользователя страница 11

Features and Accessories

ZS1000-OM-E Rev C

3–1

3  Features and Accessories

The ZS1000 probe is provided with numerous features and accessories
to make probing and connecting to different test points easier than ever.

PROBE HEAD

The small, low mass probe
head is designed for ease of
use and high performance.

The probe tip socket fits eas-
ily onto 0.025 inch square
pins  for direct access to test
points. Several different
adapters are available which
connect directly in the  probe
socket.

The ground socket will accept
several different ground leads
to provide a short ground
path for high frequency per-
formance.

DESCRIPTION OF STANDARD AND OPTIONAL ACCESSORIES

The following accessories can be pushed into the probe tip socket,
ground socket or any other socketed lead or adapter.

A. Tips

Straight Tip

Rugged tip designed to con-
nect to the smallest vias and
small test points. Fits in
either probe socket.

PK-ZS-001, package of 4

Содержание ZS1000

















































Отзывы:

Нет отзывов