LeCroy WS-DCADAP, Руководство пользователя

Страница: 7 / 27

EXTERNAL DC ADAPTER User’s Manual
The design of the DC Adapter has been verified to conform to the
applicable safety standards (EN 61010-1:2001, UL 61010-1 2
nd
Edition and CAN/CSA C22.2 No.61010-1-04) per the following
limits:
Installation (Overvoltage) Category I
(All mains isolated terminals)
Pollution Degree 2
Protection Class I
CAUTION
To avoid personal injury or damage to the WS-DCADAP or the
WaveSurfer oscilloscope connected to it, review and comply with
the following safety precautions.
•
Use only as intended.
The WS-DCADAP is intended to be used only with the LeCroy
WaveSurfer series oscilloscopes to supply the DC drive power to
the scope. Use of the WS-DCADAP and/or the scope it is
connected to in a manner other than specified may impair the
protection mechanisms.
•
Connect and disconnect properly .
Avoid damage to cables thru excessive bending.
•
Do not use in wet/damp or explosive atmospheres.
•
For indoor use only.
The WS-DCADAP is intended for indoor use and should be
operated in a clean, dry, environment.
•
Do not operate with suspected failures.
Do not use WS-DCADAP if any part is damaged. All
maintenance should be referred to qualified service personnel.
•
Keep product surfaces clean and dry.
3